| Manufacturer | Part # | Datasheet | Description |

List of Unclassifed Man...
|
88950304 |
117Kb/2P |
The LED continuously signals the presence of voltage at the output and, when flashing, triggering of the self-protection |

Siemens Semiconductor G...
|
BAR63-02W |
24Kb/4P |
Silicon PIN Diode (PIN diode for high speed switching of RF signals, Low forward resistance, small capacitance small inductance) |

ADTech
|
ADT1210NA |
44Kb/1P |
provides the interface between logic and IR signals for through-air, serial and half-duplex IR wireless data links |

List of Unclassifed Man...
|
88950303 |
117Kb/2P |
The LED continuously signals the presence of voltage at the output and, when flashing, triggering of the self-protection |

PHOENIX CONTACT
|
2700839 |
231Kb/13P |
The module is designed for use within an ST station. It is used to output analog voltage and current signals. |
| 2700842 |
63Kb/5P |
The module is designed for use within an ST station. It is used to acquire analog voltage and current signals. |

Fairchild Semiconductor
|
FXMA108 |
628Kb/18P |
Dual-Supply, 8-Bit Signal Translator with Configurable Voltage Supplies and Signals Levels, 3-State Outputs and Auto Direction Sensing |

THOR communications
|
F-RF-T |
514Kb/2P |
The F-RF-TX transmitter is used to transmit RF cable TV signals (45- 870MHz) over a fiber optic cable |

PHOENIX CONTACT
|
2810913 |
165Kb/7P |
MCR 3-way isolating amplifier, with configurable I/O, for the electrical isolation of analog signals, with GL approval, preconfigured. |

Pulse A Technitrol Comp...
|
PC-10-90 |
275Kb/2P |
Signals PC low power transformers are designed to operate between 50 Hz and 500 Hz without any degradation in output voltage. |

Samsung semiconductor
|
S5C7320X01 |
221Kb/13P |
S5C7320X01 receives digital data from CCD-using video camera systems such as MMPC and surveillance cameras, and outputs combined video signals |

List of Unclassifed Man...
|
ED-PI400EXT |
1Mb/4P |
40pin IO Extender supports Raspberry Pi400 and other Raspberry Pi Computers which need to connect 40pin IO signals with daughter boards. 2022-10-24 |

Analog Devices
|
AD7176-2 |
959Kb/68P |
The AD7176-2 is a fast settling, highly accurate, high resolution, multiplexed 誇-? analog-to-digital converter (ADC) for low band-width input signals. REV. 0 |

Siemens Semiconductor G...
|
BAR63 |
80Kb/4P |
Silicon PIN Diode (PIN diode for high speed switching of RF signals Low forward resistance Very low capacitance For frequencies up to 3 GHz) |
| BAR63-03W |
52Kb/4P |
Silicon PIN Diode (PIN diode for high speed switching of RF signals Low forward resistance Very low capacitance For frequencies up to 3 GHz) |

Allegro MicroSystems
|
ATS636LSE |
348Kb/15P |
The ATS636LSE programmable, true power-on state (TPOS), device is optimized Hall-effect IC and rare-earth pellet combinations that switch in response to magnetic signals... |

OKI electronic componet...
|
ML7041 |
236Kb/28P |
single-channel full duplex CODEC LSI device which performs mutual transcoding between the analog voice band signals ranging from 300 to 3400 Hz and th |

Cooper Bussmann, Inc.
|
0402ESDA-MLP8 |
388Kb/2P |
The PolySurg??0402ESDA-MLP ESD Suppressors protect valuable high-speed data circuits from ESD damage without distorting data signals as a result of its ultra-low (0.05pF typical) capacitance. |

PHOENIX CONTACT
|
2742599 |
95Kb/5P |
The terminal is designed for use within an Inline station. It serves to output signals and provides the possibility of channel for channel extended diagnostics for overload, short-circuit or line interrupt faults. |
| 2835613 |
97Kb/5P |
Ex-i output signal conditioner, HART-capable. Isolates and sends intrinsically safe 0/4-20 mA signals to a load (I/P converters, control valves, displays) in Ex areas. Galvanic 3-way isolation (input / output / supply). Line fault detection. |