| Manufacturer | Part # | Datasheet | Description |
PHOENIX CONTACT
|
1658273 |
43Kb/2P |
Rough-polish film, 5 關m, for assembly tool set VS-GOF-FA-KONFTOOL ..., for multi-mode and single-mode, 50 |
| 1658260 |
43Kb/2P |
Polish film, 3 關m, for assembly tool set VS-GOF-FA-KONFTOOL ..., for multi-mode and single-mode, 50 pieces |
| 2320487 |
44Kb/2P |
Data cable for communication between higher level controllers and QUINT UPS-IQ uninterruptible power supply units. |
| 0830814 |
54Kb/2P |
The cable marker labels consist of a self-adhesive marking field and a transparent protective foil |
| PABE-AZ |
51Kb/2P |
Alignment tool for cable markers, green, Unlabeled, Mounting type: Insert, Lettering field: 4 x 2.1 mm |
| 3000662 |
69Kb/5P |
For secure and space-saving accommodation of plug-in contacts in cable ducts and distributor shafts |
| 0830677 |
57Kb/3P |
Cable marker label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, cable diameter: ??6 mm, lettering field size: 13 x 13 mm |
| 3076484 |
76Kb/5P |
Reliable cable connection is ensured by three-point centering of the conductor in the prismatic sleeve base |
| CF-500DIE-RC-10 |
44Kb/2P |
Die for crimping machine CF 500, for cable lugs (C-RC... and C-FC...) 0.5 - 10 mm짼 |
| CF-500DIE-RC-16 |
44Kb/2P |
Die for crimping machine CF 500, for uninsulated cable lugs (C-RC... and C-FC...) 16 mm짼 |
| CRIMPFOX-C50-RC-25 |
47Kb/2P |
Die (lower part), for CRIMPFOX-C50, for non-insulated cable lugs (DIN 46228) 25 mm짼, trapeze crimp |
| FLLCXCON-N |
44Kb/2P |
The length of the leaky wave conductor must be adapted to the special length in the application. Connectors are then installed at both cable ends. Wireless devices can be connected to these via a flexible connecting cable. |
| 0830678 |
57Kb/3P |
Cable marker label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, cable diameter: ??14 mm, lettering field size: 25 x 19 mm |
| CRIMPFOX-MHS-1 |
48Kb/3P |
Die, for CRIMPFOX-M, for 0.1 - 0.4 mm짼 and 4 - 6 mm짼 shrink connectors (light green, yellow), packed in a modular storage box |
| 1424397 |
68Kb/3P |
Box mounting bases D25, with single locking latch, material: Die-cast aluminum, salt water resistant, protective cover material: PC, cable outlets: 2, lateral, height: 57 mm, cable gland: none, support sleeve: no, 2x M25, protective cover: yes, Standard |
| CRIMPFOX-C120-RC-70 |
47Kb/2P |
Die (upper part), for CRIMPFOX-C120, for non-insulated cable lugs (DIN 46234) 6 + 70 mm짼, indent crimp |
| CRIMPFOX-C120-RC-50 |
47Kb/2P |
Die (lower part), for CRIMPFOX-C120, for non-insulated cable lugs (DIN 46234) 6 + 50 mm짼, indent crimp |
| CRIMPFOX-RC-10 |
55Kb/2P |
The CRIMPFOX?멢C 10 completes the range of crimping pliers for uninsulated cable lugs and insulated tube lugs |
| CF-500DIE-RCI-1 |
44Kb/2P |
Die for crimping machine CF 500, for insulated cable lugs (C-RCI... and C-FCI...) 0.14 - 1.5 mm짼 |
| CRIMPFOX-C50-RC-35 |
47Kb/2P |
Die (upper part), for CRIMPFOX-C50, for non-insulated cable lugs (DIN 46234) 6 + 35 mm짼, indent crimp |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
