| Manufacturer | Part # | Datasheet | Description |

PHOENIX CONTACT
|
CRIMPFOX-C120-RC-70 |
47Kb/2P |
Die (upper part), for CRIMPFOX-C120, for non-insulated cable lugs (DIN 46234) 6 + 70 mm짼, indent crimp |
| CRIMPFOX-C120-RC-50 |
47Kb/2P |
Die (lower part), for CRIMPFOX-C120, for non-insulated cable lugs (DIN 46234) 6 + 50 mm짼, indent crimp |
| CRIMPFOX-RC-10 |
55Kb/2P |
The CRIMPFOX?멢C 10 completes the range of crimping pliers for uninsulated cable lugs and insulated tube lugs |
| CF-500DIE-RCI-1 |
44Kb/2P |
Die for crimping machine CF 500, for insulated cable lugs (C-RCI... and C-FCI...) 0.14 - 1.5 mm짼 |
| CRIMPFOX-C50-RC-35 |
47Kb/2P |
Die (upper part), for CRIMPFOX-C50, for non-insulated cable lugs (DIN 46234) 6 + 35 mm짼, indent crimp |
| 2314244 |
52Kb/5P |
Assembled halogen-free round cable, with two 50-pos. socket strips (1:1 connection), for connecting 32 channels. |
| 2741477 |
45Kb/2P |
Passive signal distributor, connection element, from flat-ribbon cable to 5 x M12 plug, e.g., for connecting up to 5 FLX AS-i M8 devices or 5 AS-i S-Line devices to the AS-i flat-ribbon cable |
| 2320490 |
44Kb/2P |
Data cable for communication between higher-level controllers and QUINT UPS-IQ and TRIO UPS uninterruptible power supply units. |
| 1606246 |
64Kb/2P |
Cable connector, straight, shielded: yes, Screw locking, M23, No. of pos.: 8+1, type of contact: Socket, Solder connection |
| 2296728 |
96Kb/3P |
Round cable set, for connection to the VARIOFACE system cabling, with a 50-position socket strip and four 14-position socket strips, for splitting max. 32 channels into 4 x 8 channels, no. of positions: 50/ 4 x14, cable length 3.0 m |
| 2296773 |
95Kb/3P |
Round cable set, for connection to the VARIOFACE system cabling, with a 50-position socket strip and four 14-position socket strips, for splitting max. 32 channels into 4 x 8 channels, no. of positions: 50/ 4 x14, cable length 10.0 m |
| CRIMPFOX-C120-RC-35 |
48Kb/2P |
Die (lower part), for CRIMPFOX-C120, for non-insulated cable lugs (DIN 46234) 10 + 16 +25 + 35 mm짼, indent crimp |
| RAD-CAB-EF142-5M |
47Kb/3P |
Antenna cable, 5 m in length; SMA (male) -> SMA (male), attenuation approx. 0.93 dB at 2.4 GHz; impedance 50 ohms |
| 0827283 |
52Kb/2P |
Marker carriers, transparent, unlabeled, mounting type: slide on, cable diameter range: 2.5 - 5 mm, lettering field size: 15 x 4.2 mm |
| 2304322 |
48Kb/3P |
The DeltaV system can be used to install the process wiring via "mass termination blocks" (MTBs) using flat-ribbon cable plugs |
| 2304351 |
48Kb/3P |
The DeltaV system can be used to install the process wiring via "mass termination blocks" (MTBs) using flat-ribbon cable plugs |
| 2304937 |
47Kb/3P |
The DeltaV system can be used to install the process wiring via "mass termination blocks" (MTBs) using flat-ribbon cable plugs |
| 2304953 |
47Kb/3P |
The DeltaV system can be used to install the process wiring via "mass termination blocks" (MTBs) using flat-ribbon cable plugs |
| 2304898 |
47Kb/3P |
The DeltaV system can be used to install the process wiring via "mass termination blocks" (MTBs) using flat-ribbon cable plugs |
| 0803316 |
54Kb/2P |
The marker has two fastening eyes so that it can be attached to the conductor by means of PKB ... cable binders |