| Manufacturer | Part # | Datasheet | Description |
PHOENIX CONTACT
|
CRIMPFOX-C50-RC-25 |
47Kb/2P |
Die (lower part), for CRIMPFOX-C50, for non-insulated cable lugs (DIN 46228) 25 mm짼, trapeze crimp |
| FLLCXCON-N |
44Kb/2P |
The length of the leaky wave conductor must be adapted to the special length in the application. Connectors are then installed at both cable ends. Wireless devices can be connected to these via a flexible connecting cable. |
| 0830678 |
57Kb/3P |
Cable marker label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, cable diameter: ??14 mm, lettering field size: 25 x 19 mm |
| 1424397 |
68Kb/3P |
Box mounting bases D25, with single locking latch, material: Die-cast aluminum, salt water resistant, protective cover material: PC, cable outlets: 2, lateral, height: 57 mm, cable gland: none, support sleeve: no, 2x M25, protective cover: yes, Standard |
| CRIMPFOX-C120-RC-70 |
47Kb/2P |
Die (upper part), for CRIMPFOX-C120, for non-insulated cable lugs (DIN 46234) 6 + 70 mm짼, indent crimp |
| CRIMPFOX-C120-RC-50 |
47Kb/2P |
Die (lower part), for CRIMPFOX-C120, for non-insulated cable lugs (DIN 46234) 6 + 50 mm짼, indent crimp |
| CRIMPFOX-RC-10 |
55Kb/2P |
The CRIMPFOX?멢C 10 completes the range of crimping pliers for uninsulated cable lugs and insulated tube lugs |
| CF-500DIE-RCI-1 |
44Kb/2P |
Die for crimping machine CF 500, for insulated cable lugs (C-RCI... and C-FCI...) 0.14 - 1.5 mm짼 |
| CRIMPFOX-C50-RC-35 |
47Kb/2P |
Die (upper part), for CRIMPFOX-C50, for non-insulated cable lugs (DIN 46234) 6 + 35 mm짼, indent crimp |
| 2314244 |
52Kb/5P |
Assembled halogen-free round cable, with two 50-pos. socket strips (1:1 connection), for connecting 32 channels. |
| 2741477 |
45Kb/2P |
Passive signal distributor, connection element, from flat-ribbon cable to 5 x M12 plug, e.g., for connecting up to 5 FLX AS-i M8 devices or 5 AS-i S-Line devices to the AS-i flat-ribbon cable |
| 2320490 |
44Kb/2P |
Data cable for communication between higher-level controllers and QUINT UPS-IQ and TRIO UPS uninterruptible power supply units. |
| 1606246 |
64Kb/2P |
Cable connector, straight, shielded: yes, Screw locking, M23, No. of pos.: 8+1, type of contact: Socket, Solder connection |
| 2296728 |
96Kb/3P |
Round cable set, for connection to the VARIOFACE system cabling, with a 50-position socket strip and four 14-position socket strips, for splitting max. 32 channels into 4 x 8 channels, no. of positions: 50/ 4 x14, cable length 3.0 m |
| 2296773 |
95Kb/3P |
Round cable set, for connection to the VARIOFACE system cabling, with a 50-position socket strip and four 14-position socket strips, for splitting max. 32 channels into 4 x 8 channels, no. of positions: 50/ 4 x14, cable length 10.0 m |
| CRIMPFOX-C120-RC-35 |
48Kb/2P |
Die (lower part), for CRIMPFOX-C120, for non-insulated cable lugs (DIN 46234) 10 + 16 +25 + 35 mm짼, indent crimp |
| RAD-CAB-EF142-5M |
47Kb/3P |
Antenna cable, 5 m in length; SMA (male) -> SMA (male), attenuation approx. 0.93 dB at 2.4 GHz; impedance 50 ohms |
| 0827283 |
52Kb/2P |
Marker carriers, transparent, unlabeled, mounting type: slide on, cable diameter range: 2.5 - 5 mm, lettering field size: 15 x 4.2 mm |
| 2304322 |
48Kb/3P |
The DeltaV system can be used to install the process wiring via "mass termination blocks" (MTBs) using flat-ribbon cable plugs |
| 2304351 |
48Kb/3P |
The DeltaV system can be used to install the process wiring via "mass termination blocks" (MTBs) using flat-ribbon cable plugs |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
