| Manufacturer | Part # | Datasheet | Description |

PHOENIX CONTACT
|
2318318 |
69Kb/4P |
Round cable set; connection 1: IDC/FLK socket strip (1x 10-position, 180 째-Out put); connection 2: IDC/FLK socket strip (1x 10-position, 90 째-out put); cable length: 1 m |
| 2304649 |
79Kb/3P |
Splitting cable (1 x 25-pos. D-SUB female connector to 2 x 14-pos. |
| CUTFOX-12 |
49Kb/2P |
Cable cutter, for copper and aluminum up to 12 mm diameter (up to 35 mm짼) |
| 2304652 |
79Kb/3P |
Splitting cable (1 x 25-pos. D-SUB female connector to 2 x 14-pos. |
| 2318402 |
70Kb/4P |
Round cable set; connection 1: IDC/FLK socket strip (1x 14-position, 180 째-Out put); connection 2: IDC/FLK socket strip (1x 14-position, 90 째-out put); cable length: 1.5 m |
| 2318554 |
70Kb/4P |
Round cable set; connection 1: IDC/FLK socket strip (1x 20-position, 180 째-Out put); connection 2: IDC/FLK socket strip (1x 20-position, 90 째-out put); cable length: 1 m |
| 2318635 |
70Kb/4P |
Round cable set; connection 1: IDC/FLK socket strip (1x 26-position, 180 째-Out put); connection 2: IDC/FLK socket strip (1x 26-position, 90 째-out put); cable length: 1 m |
| 2318965 |
53Kb/3P |
Assembled, shielded round cable, with two 16-pos. socket strips (1:1 connection), length: 5 m |
| 2320487 |
44Kb/2P |
Data cable for communication between higher level controllers and QUINT UPS-IQ uninterruptible power supply units. |
| 0830814 |
54Kb/2P |
The cable marker labels consist of a self-adhesive marking field and a transparent protective foil |
| PABE-AZ |
51Kb/2P |
Alignment tool for cable markers, green, Unlabeled, Mounting type: Insert, Lettering field: 4 x 2.1 mm |
| 3000662 |
69Kb/5P |
For secure and space-saving accommodation of plug-in contacts in cable ducts and distributor shafts |
| 0830677 |
57Kb/3P |
Cable marker label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, cable diameter: ??6 mm, lettering field size: 13 x 13 mm |
| 3076484 |
76Kb/5P |
Reliable cable connection is ensured by three-point centering of the conductor in the prismatic sleeve base |
| CF-500DIE-RC-10 |
44Kb/2P |
Die for crimping machine CF 500, for cable lugs (C-RC... and C-FC...) 0.5 - 10 mm짼 |
| CF-500DIE-RC-16 |
44Kb/2P |
Die for crimping machine CF 500, for uninsulated cable lugs (C-RC... and C-FC...) 16 mm짼 |
| CRIMPFOX-C50-RC-25 |
47Kb/2P |
Die (lower part), for CRIMPFOX-C50, for non-insulated cable lugs (DIN 46228) 25 mm짼, trapeze crimp |
| FLLCXCON-N |
44Kb/2P |
The length of the leaky wave conductor must be adapted to the special length in the application. Connectors are then installed at both cable ends. Wireless devices can be connected to these via a flexible connecting cable. |
| 0830678 |
57Kb/3P |
Cable marker label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, cable diameter: ??14 mm, lettering field size: 25 x 19 mm |
| 1424397 |
68Kb/3P |
Box mounting bases D25, with single locking latch, material: Die-cast aluminum, salt water resistant, protective cover material: PC, cable outlets: 2, lateral, height: 57 mm, cable gland: none, support sleeve: no, 2x M25, protective cover: yes, Standard |