| Manufacturer | Part # | Datasheet | Description |

Allegro MicroSystems
|
A6818 |
266Kb/7P |
Controlled output slew rate |
| ACS770XCB |
1Mb/29P |
4.1 關s output rise time in response to step input current |
| APS11900 |
1Mb/21P |
Two-Wire End-of-Line Programmable Hall-Effect Switch/Latch |
| A6264 |
374Kb/16P |
The A6264 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs. |
| A6261 |
358Kb/15P |
The A6261 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs. |
| A6262 |
359Kb/15P |
The A6262 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs. |
| A4952 |
292Kb/11P |
Designed for pulse width modulated (PWM) control of DC motors, the A4952 and A4953 are capable of peak output currents to 짹2 A and operating voltages to 40 V. |
| A8670 |
463Kb/27P |
The A8670 is a synchronous buck converter capable of delivering up to 2 A. |
| UDN2987X-6 |
253Kb/9P |
Providing overcurrent protection for each of its eight sourcing outputs, the UDN2987LW-6 driver is used as an.. |
| ACS758XCB |
649Kb/21P |
The Allegro ACS758 family of current sensor ICs provides economical and precise solutions for AC or DC current sensing. |
| ACS759XCB |
618Kb/19P |
The Allegro ACS759 family of current sensor ICs provides economical and precise solutions for AC or DC current sensing. |
| ACS759 |
989Kb/19P |
The Allegro ACS759 family of current sensor ICs provides economical and precise solutions for AC or DC current sensing. |
| A5366 |
322Kb/13P |
The A5366 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. |
| A5358 |
326Kb/13P |
The A5358 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. |
| A5367 |
281Kb/10P |
The A5367 is a low-current, BiCMOS circuit providing all of the required features for an ionization-type smoke detector. |
| A5348 |
282Kb/9P |
The A5348 is a low-current, BiCMOS circuit providing all of the required features for an ionization-type smoke detector. |
| A4490 |
397Kb/17P |
Designed to provide the power supply requirements of printers, office automation, industrial, and portable equipment, the A4490 provides three high current, |
| A3988 |
333Kb/14P |
The A3988 is a quad DMOS full-bridge driver capable of driving up to two stepper motors or four DC motors. |
| A4491 |
399Kb/16P |
Designed to provide the power supply requirements of printers, office automation, industrial, and portable equipment, the A4491 provides three high current, |
| A8731 |
466Kb/16P |
The Allegro A8731 Xenon photoflash charger IC is designed to meet the needs of ultra-low power, small form factor cameras, particularly camera-phones. |